https://basesite.com/blog/ Field notes from Basesite on designing, delivering, and keeping optimal the mechanical and electrical utility backbone of semiconductor fabs. en Sat, 08 Aug 2026 09:00:00 +0000 https://basesite.com/blog/auto-design-auto-assign.html https://basesite.com/blog/auto-design-auto-assign.html Sat, 08 Aug 2026 09:00:00 +0000 Two short video walkthroughs of the runs behind optimized utility design: auto-design lays out candidate panels and consolidates to the smallest set that serves every tool, and auto-assign lands every tool model on both substation trains within distance and build-zone constraints. https://basesite.com/blog/500-panels-not-700.html https://basesite.com/blog/500-panels-not-700.html Wed, 05 Aug 2026 09:00:00 +0000 Fabs routinely over-build their utility distribution — not because anyone is careless, but because manual design under uncertainty rewards margin on top of margin. On a leading-edge logic fab, optimized design delivered 500 panels instead of 700 versus the manual design of the same fab, and $5M less cable spend than the manual baseline. https://basesite.com/blog/why-white-glove.html https://basesite.com/blog/why-white-glove.html Wed, 15 Jul 2026 09:00:00 +0000 Today you send Basesite a tool layout and utility demands, and our engineers return the sized mechanical and electrical distribution — no software to buy, nothing to learn. That's a deliberate choice. Why the input is the hard part, why designs deserve an engineer's judgment, and what has to be true before self-serve. https://basesite.com/blog/the-living-model.html https://basesite.com/blog/the-living-model.html Wed, 24 Jun 2026 09:00:00 +0000 Every fab utility design is obsolete the moment a tool moves — unless the design lives in a model that absorbs the change. What a living model of demand, supply and capacity actually means, and what it changes for owners.